Thank Your For Stopping By

Thank you so much for stopping by to visit my blog... it is changing as I change and learn more things... I hope after Christmas to get an opportunity to make some more CARDS. I am loving Loom Knitting now... and have lots to do before Christmas....I don't mind sharing how I do things and if you have questions you can E-MAIL me @ winacard@gmail.com and I will be happy to answer any questions that I have.


Monday, November 30, 2009

Snowman Wreath - my The Gypsy Spot Design Team Challenge Card

Designed by Jeannie Phillips - Southside, AL
Click on any picture to enlarge.
OH OH OH... : Custom Crops donated a Gypsy!!..Yes a Gypsy to The Gypsy Spot... be sure a go to The Gypsy Spot and find out how to enter to win!! Its being given away Tuesday December 1st!!... this is my The Gypsy Spot DT Challenge card for this week... and it was so so so so inspired by Donna Mundinger... so be sure and check out the card that inspired me by clicking here!!... I didn't however use her cut file...I am a bit stubborn that way...I wanted to make one all on my own... and I don't have Design Studio .... when I saw Donna's card I got out my Gypsy and went to work... and this is how my card ended up...and it was just perfect for The Gypsy Spot for this week!!!... I needed a snowman or snowflakes... be sure and check out The Gypsy Spot for the other wonderful cards that the very talented DT members have created!! Thank you so much for looking! Hugs, Jeannie
CRICUT & GYPSY
Joys of the Season
Snowfriends
George
I have the instructions below on the mat so that they will be eaiser to understand.
You can click on any picture to enlarge so if you need the text bigger in the instructions just click on the picture.
I did not include Cricut sizes this time because of all the welding.
Please let me know which way you like the instructions better.

Friday, November 27, 2009

Bouncing Baby Tiger

Designed by Jeannie Phillips - Southside, AL
Click on any picture to enlarge.
I made an Alabama Baby card the other day and since I have one child that graduated from Alabama and one child at Auburn it was only fair to create an Auburn card to match... I had lots of fun making both cards... the Alabama card is just a couple of post down so be sure and visit it too if you haven't already... I hope you like!!.. thank you so much for looking! Hugs, Jeannie
CRICUT & GYPSY
Pooh & Friends
Accent Essentials
Opposites Attract
Street Signs
New Arrival
George
Instructions below with the screen shot... you can enlarge it by clicking on the picture.
I think this will make the instructions clearer.. let me know which way you like them best so I know how you want me to post the instructions.All items in red are welded together.
Click on the picture to enlarge and you can read the instructions much better.
You can e-mail me at winacard@gmail.com if you have any questions.

Win a Gypsy!!

Yes you can registure to WIN a Gypsy!! Go check out The Gypsy Spot!! and find out how to win!!

Tuesday, November 24, 2009

Bama Baby

Designed by Jeannie Phillips - Southside, AL
Click on any picture to enlarge.
Alabama football is huge in Alabama..... my Daughter Madison graduated from Alabama... my son is at its rival Auburn... anyway its huge and the elephant is the school mascot.... and the cheer is Roll Tide... every time I see this elephant on New Arrival I want to make an Alabama baby card... every time... its a perfect baby card to give to a man that just had a baby... that is if he is an Alabama fan... now I need to figure out how to make a cut Auburn Baby, baby card... hope you like...thanks so much for looking! Hugs, Jeannie
CRICUT & GYPSY
New Arrival
Elephant's cut @ w 3.60 x h 2.98 - on the Cricut I would cut this @ 3 inches.
You can set the height at 2.98 in all 3 parts of the elephant and the height will be right.
Baby Rattles cut @ w 0.66 x h 1.22 -on the Cricut I would cut this @ 1.25
I cut 3 of these...cut the handle off of one and popped the rattle part on the complete rattle which I adhered directly to the card... on rattle I cut in black and trimmed down to the center of the rattle to make the black trim on the rattle.
Accent Essentials
Scalloped edges cut @ w 5. 0 x h 0.53 on read dial size - on the Cricut I would cut this @ 1 inch.. but am not sure at all what the length would be.
These I welded to the George Square.
George
Square cut @ w 5.0 x h 3.25 on real dial size - if using the Cricut I would cut this with my paper trimmer.
Opposites Attract
"Baby" cut @ h 1.39 the width will be right on all the letters if you set just the height -on the Cricut I would cut these @ 1 1/2 inches.
I welded these letter together.
Street Signs
"BAMA" cut @ h 1.43 the width will be right on all the letters if you set the height - on the Cricut I would cut these letters at 1 1/2 inches.
I welded these letter together.These are the cuts on my mat I moved the rattle by the Bama's down next to Baby because I decided to cut this cut in black... all images in red are welded.

It's Been Forever

Designed by Jeannie Phillips - Southside, AL
Click on any picture to enlarge.
I have been looking at this cut (the swirly thing on the bottom of the shelf) thinking that this would be a beautiful shelf!!... so I flipped it and welded a rectangle to it... and made myself a shelf... but I couldn't thing what in the world I wanted to put on this shelf.... and while I was going through my cuts I came across this beautiful corner... that I have never been able to incorporate into any of my card before and this idea just came to me... it so reminded me of an old house with the phone in the hall on a shelf... with a chair sitting by it... so so sad that I am old enough to remember seeing such as this!!! lol... and this is the card I ended up with... I was quite tickled with the end result...and it was such an easy card... what an extra!!.. hope everyone is having such a wonderful day! ... Hugs, Jeannie
CRICUT & GYPSY
Stamping
Swirls for bottom of shelf cut @ w 3.65 x h 1.29 - on the Cricut I would cut this at 1 1/4 inches.
George
Rectangle for top of shelf is a square cut @ w 3.75 x h 0.30 on real dial size I cut this 3 times one of the rectangles is welded to the swirls to make the shelf and popped the the second from the shelf and the third one from the second- if I was using the Cricut I would cut this with a paper trimmer at w 3 3/4 x h 1/4 of an inch.
Sweethearts
Corner Filigree cut @w 2.82 x h 2.71 - on the Cricut I would cut this @ 2 3/4 inches.
From My Kitchen
Phone cut @ w 2.70 x h 1.79 I cut this twice so I could pop the top phone..from the top phone I cut the handset and the cord and used on the inside of the card - on the Cricut I would cut the phone @ 1 3/4 or 2 inches.
I also cut the layer feature of the phone to get the center tan oval of the phone.
The easiest way to get this the right size is to click on the phone and then pick your layer feature then they will be the right size. This is my mat before I cut... I moved the images that were to be black close together before I cut... the images in red are welded together.

Sunday, November 22, 2009

Vase of Joy

Designed by Jeannie Phillips - Southside, AL
Click on any picture to enlarge.
I was going through my cartridges on my Gypsy and found this JOY with a flower on it.... and just loved the joy...but didn't want the flower so I decided to weld the vase to the joy over the top of the flower... and then the rest of the card just evolved from that... the Shadow Joy and Vase is cut in a green/snowflake print... the Joy and Vase without the shadow cut in red and then just the vase is cut in beige...in the red cut the circle of the flower still cuts out.... it just didn't weld right there...but it was going to be covered by the beige vase so it didn't matter... welding is shown in the screen shot at the bottom of the page... all red items are welded.... thank you so much for looking... Hugs, Jeannie
CRICUT & GYPSY
Gypsy Wanderings
Joy cut @ w 3.51 x h 3.37 - On the Cricut I would cut his at 3 1/2 inches.
Joy Shadow cut @ w 3.70 x h 3.37 - on the Cricut I would cut this @ 3 1.2 inches.
Walk In My Garden
Vase and vase shadows cut @ h 2.93..when you set the height the width will be right - on the Cricut I would cut these @ 3 inches.
Joys of the Season
Poinsettias cut @ w 1.81 x h 1.85 - on the Cricut I would cut these at 1 3/4 inches.
Stretch Your Imagination
Flourish in Square cut @ w 1.71 x h 1.64 I used the square on the inside of the card with a red square behind it and the flourish in the vase - on the Cricut I would cut this @ 1. 3/4 inches.
Storybook
Flourish cut @ w 2.75 x h 0.59 - on the Cricut I would cut this at 3/4 inch because I stretched it on my Gypsy.
Flourish (second florish on second row on mat shot) cut @ w 1.93 x h 1.86 - on the Cricut I would cut this @ 3/4 inch.
*I guess at the Cricut sizes based on the height sizes of my Gypsy cuts... these are the sizes I would have tired first when not using my Gypsy.

Thanks in Red, Black & White

Designed by Jeannie Phillips - Southside, AL
Click on any picture to enlarge.
I wanted to make a card today...and had no starting place at all!!!... so I decided to use a pick a design that I felt I would probably never use and see what I could come up with... that is how this card evolved... the emblem in the black circle is what I started with... and then I just went from there... I wish that I had embossed the white piece with the Swiss dots folder but thought of that only after it was too late to do it... silly me!! I hope you like my odd little thank you card.
Hugs, Jeannie

CRICUT & GYPSY
Home Accents
Emblem in the black circle cut @ w 1.92 x h 1.84 - on the Cricut I would cut this at 2 inches.
When It's Cold Outside
Snowflake cut @ w 1.82 x h 2.o - on the Cricut I would cut this at 2 inches.
Gypsy Wanderings
Thanks cut @ w 2.63 x h 1.63 - on the Cricut I would cut this @ 1 3/4 inches.
Shadow thanks cut @ w 2.78 x h 1.63 - on the Cricut I would cut this at 1 3/2 inches.
George
Circles cut @ w 2.26 x h 2.11 - on the Cricut I would cut these @ 2 1/4 inches.
Rectangle under the thanks cut @ w 4.99 x h o.88 - using the Cricut I would cut this piece on a paper trimmer.
Rectangle with the scalloped edge cut @ w 3.0 x h 5.0 - using the Cricut I would cut this piece on a paper trimmer.
Home Accents (again)
Scalloped pieces cut @ w 2.61 x h 0.74 there are two of these on each rectangle - my best guess on these on the Cricut would be 3/4 and inch.

Saturday, November 21, 2009

Christmas With the Cricut - Crafty Gift

At our house we like Christmas to last forever... a tradition started by my Grandmother... and one we all embraced on my mom's side of the family!!... my husband seems to like it too... but we all get each other several gifts... one regular gift then several small gifts...so each person has lots to open..then we each take a turn opening gifts one at a time until all the gifts are gone... saving the biggest gifts for last... so when I was to make a crafty gift I thought of this as a wonderful treat for one of the small gifts... I hope that you like it!!!... I have loved loved my stint as guest designer at Christmas With the Cricut and feel so honored to be included in that with somebody as talented as Susan!! ... Be sure and hop over to Christmas With the Cricut and see the other wonderful crafty gifts!!... and go from there to Susan's blog and leave her a comment too! Hugs! Jeannie

CRICUT
From My Kitchen
Rooster cut @ 1 3/4 inches.
I cut him once in brown and once in red for each square...cut away the red parts I needed and added them to the brown rooster cut.
Click on picture below to get the other instructions, they were much clearer instructions if I put them in the picture.

Friday, November 20, 2009

Christmas With the Cricut - Advanced Card

I have been waiting all week to post this card... its been finished like 2 months...and it just kills me not to get to post something!!...lol... to make this card you start with my Simple Card Monday - Card... just click here to see that card and its instructions! ...and finish off with the instructions below... I forgot to get a picture of my new cuts...so please forgive... I did try to make really good instructions!! I hope you like it!!! ... I had a blast turning my Simple Card Monday card into an Advanced card... be sure and Check out Christmas With the Cricut!!! and visit Susan's blog from there and comment on her card... She had done such beautiful work this week! Hugs, Jeannie

Advanced Card
Winter Woodland Cartridge
I started with the finished simple card from Monday’s card.
Then I cut a second tree @ 5 ½ inches... and 4 more snow layers at 5 ½ inches.
I cut 3 more birds ...on the flipped feature.
I cut several more snowflakes...of each kind.
I cut the snowman @ 2 3/4 inches... 2 times in white and 2 times in red on the shift feature and once in yellow on the layer feature and once in yellow on the shift-layer feature.
I trimmed three branches from my new tree...added the snow to different branches than before and bent out the limbs... popped this tree from the fist tree with pop-dots.
I then inked the ground snow layers and glued two ground snow layers together as wide as the blue background paper... I did this twice.
I attached the first new layer of snow to the popped tree base..then I added the white showman inked in blue ink to the snow base with glue and popped the top part of the snowman from the background paper.
I then popped the last layer of ground snow with pop-dots.
I assembled the second snowman... adding his inked scarf and buttons directly to him...along with one of the red hats... I used a sharpie for his eyes...and pink chalk applied with a make-up q-tip to his cheeks..then I added a dot of white gel ink to each cheek.
I added the yellow strip to the second hat...inking both the strip of yellow and the hat in brown..I popped this hat up from the first hat with pop-dots... then I glued the snowman bottom to the top snow layer and pop-dotted the top of the snowman to the snowman below.
I added the extra birds..glueing them to the popped layers only at their feet.
I used leftover branch snow on the inside of the card for the pile of snow the inside bird is laying on...and added a snowflake.
All snow parts are inked in blue ink...all other parts are inked in brown.








Thursday, November 19, 2009

Christmas With the Cricut - Scrapbook Page

I have to tell you that this Christmas With the Cricut project terrified me!!!... and I am not kidding at all!!!.. it is the one project that made me almost turn this opportunity down!!... I am not kidding one bit... my mat shot was just confusing because I used the layering of pages feature on my Gypsy... so I am just going to tell you the cut sizes... I so hope that you like my scrapbook page!!!.... just posting it now gives me a tummy ache... thank you so much for looking... be sure and check out the other projects at Christmas With the Cricut...and to visit Susan's blog when you do!...everything has been so great this week!
CRICUT & GYPSY
Winter Woodland
I love these letters.
All the letters shadows cut @ h 3.21 inches the with will be right when you set the height.
Large snowflake cut @ w 11.84 x h 13.95.Align Center
I welded the shadow letters to the large snowflake.
These were the layers on my first page.
On the second page I cut the following.
Winter Woodland
All letters cut @ h 3.21...the width will be right when you set the height.
George
Largest Square for picture cut @ w 5.81 x h 5.42.
On the third page I laid out the following.
George
Smaller square for picture cut @ w 4.57 x h 4.26.
Winter Woodland
Larger small snowflake cut @ w 4.96 x h 7.11.
Smallest snowflake cut @ w 3.20 x h 4.16
On the forth page I cut the following.
All the letter from "our" cut @ h 1.11 inches the with will be right when you set the height.
"1" cut @ w 1.13 x h 2.89
"st" cut @ h 1.21... width will be right when you set the height.

Wednesday, November 18, 2009

Snowbird

Designed by Jeannie Phillips - Southside, AL
Click on any picture to enlarge.

I don't know if I am going to get to make another card this week.. Dr appointment's 2 for mom ..one for me.... and our Thanksgiving is this weekend.... so I am going to be very busy.... and am missing making cards already... I did get my When Its Cold Outside cartridge today!!!... so I just had to make this card.....it is a card that should have been easy but then I had a dull blade...then a too sticky mat... and it just got hard!!...but when I did get the cuts to cut out I was really really happy with the results... I hope that you like it too... thank you so much for looking!
hugs, Jeannie
CRICUT & GYPSY
When It's Cold Outside
Top left snowflake is a shadow cut @ w 1.86 x h 2.05 - on the Cricut I would cut this @ 2 inches.
Bottom left snowflake cut @ w 2.43 x h 2.24 - on the Cricut I would cut this @ 2 1/4 inches.
Large snowflake is a shadow cut @ w 3.81 x h 3.51 -on the Cricut I would cut this @ 3 1/2 inches.
For the top two I added a George octagon cut @ w 1.64 x h 152 - you would not need this cut without the Gypsy.
Winter Woodland
Cut allCardinal cuts @ h 2.19..the widths will be right if you set the just the heights.
CUTTLEBUG
Snowflake Folder

Christmas With the Cricut - Christmas Gift Tags

I enjoyed doing these tags for Christmas With the Cricut... I got to make my own embossing folder...now that was fun fun fun.... Since it was my first embossing folder and a small tag I wanted to start out simple... I really like the idea of combining the cut with the embossing... hope that you like it too... be sure and check out the other designs at Christmas With the Cricut...and when you are there hop on over to Susans blog and leave her a comment about her beautiful work!!..Don't forget to leave a comment on the Christmas With the Cricut blog for a chance to win!! Hugs, Jeannie
GIFT TAGS

For my gift tags I wanted to try my new Cricut Cuttables to emboss my tags.... I was so excited when this worked out just the way I wanted it to!
1. I cut the Snowman (page 47) of the Winter Woodland cartridge...I cut him on blackout into the Cricut Cuttables sheet.
2. I cut out my tag (page 33) form the Winter Woodland cartridge once in white @ 3 inches on real dial size and once in red @ 3 1/4 inches on real dial size.
3. I cut snowman layers on the shift feature in green and on the layer feature in red all on 2 inches.
4. I embossed the white tag with the snowman Cricut Cuttables embossing folder.
5. I added the scarf, hat and heart to the snow man. I then inked the tags with brwon ink around the edges and assambled the tag and added the ribbon.
Blog Widget by LinkWithin
Thank you so much for signing my Guestbook... I have no idea how to reply to people who do sign in... but I so love it when you do!!... So thank you so much!... if you ever have any questions you can email me @ winacard@gmail.com. I will be happy to answer any questions you might have.

Thank you again for signing my Guestbook~
Jeannie

Please Sign In